|
KUANI : Double Trigger Impact Wrench Series *product1
This series is designed for applications with continuous
fastening tasks on a factory assembly line.
The Double Trigger design enables the operator to switch between forward and reverse quickly and smoothly by using index and middle fingers.
This series is assembled with precision machined parts and extremely durable in heavy loaded production areas.
With two air inlets, one on the top end of the handle and the other at the rear, this offers the operator choices of air hose installation to suit their working posture.
3/8" & 1/2” Sq. Dr. Super Duty Air Impact Wrench
Double Trigger & For Assembly Line
‧ Mono-power setting
‧ Double Trigger Design for one-handed operation
‧ Dual air inlet design for convenient working posture
‧ 150 to 350 f t-lb of Max torque with 9,000 to 10,000 rpm free speed
‧ Productive & extremely durable design, suitable for continuous fastening tasks on high-volume assembly lines
‧ High instant torque output
KUANI : Externally Adjustable Clutch Air Screwdriver Series *product2
This clutch type is derived from positive clutch design but with a spring in the mechanism for rough torque setting.
Torque is set by turning an external torque locator that changes the spring tension and thus alters the torque created by the clutch. The same as the primary Positive clutches, extra torque can be created by operator’s force in re-engaging the slipping clutch jaws.
1/4" Hex. Super Duty Air Screwdriver
‧ Torque range up to 5-140 in-lb (0.6-15.8 Nm)
‧ Free speed at 1200 to 3000 rpm
‧ Convenient external torque locator
‧ Ergonomic grip with smooth trigger and slide direction
switch
‧ Precision machined par ts for bet ter per formance
‧ Suitable for wide and frequent torque adjustments
‧ Ideal for wood screws, self-tapping joints, locknuts, and soft-join applications
KUANI : Automatic Shut-off Air Screwdriver Series *product3
KUANI’s shut-off screwdrivers are precise on torque setting and automatically stop upon meeting the preset torque. These tools are designed for the industrial assembly line where critical control on torque is an essential factor. KUANI offer models of varied torque range, speed, start-up type, and handle type, giving a wide choice for the different work conditions and requirements.
To examine the torque accuracy of these shut-off tools the KI-TM-150 (torque tester) is strongly recommended.
The ideal assembly line tool
‧ A precise torque-controlled tool perfect for a high work demand on assembly lines
‧ Immediate stop upon reaching the preset torque
‧ Easily adjustable torque setting
‧ Kuani recommend the KI-TM-150 torque tester for checking the preset torque
KUANI : Torque Wrench Tester *product4
• 2 types of calibration mode for flexibility
– Standard Mode:
Mode 1 is a default mode and is calibrated according to ISO 26789. A Calibration Certificate is available upon request.
– Self-setting Mode:
Mode 2 to 5 allows the operator to set test parameters. The Check Points, shown as “ Cpoint” on the screen, can be set in mode 2 to 5 to obtain the torque curve of a benchmark torque wrench.
The Zero Point is always the default at the base origin of torque curve followed by up to 4 Cpoint settings of the operators' choice.
• 4 choices of torque unit: Kg-cm/Kg-m, In-Lb, N-m, Ft-Lb
• Range of Drop percentage: 2% to 12%
• Test results can be recorded on a computer and it is convenient to export report.
• Serial interface RS232 for PC.
KUANI GEAR CO LTD
Booth: G0316
Tel: +886-2-2903-3740
Fax: +886-2-2902-8865
E-mail: george@kuani.com
|
